| unit | item | specification | discription | note |
| Capacity | Max. Product Volume | 25L | Single station, accumulator head | |
Extruding
(Main extruding) | Screw diameter | φ82mm | Special exhaust screw for PC | |
| Screw L/D | 38:1 | | |
| Material of screw and barrel | | 38CrMoALA | |
| Plasticizing capacity | 160KG/Hr | Based on PC, changeable with different density of material | |
| Extruding method | Oil motor | Low speed, big pitch of strand | |
| Oil pump drive power | 45KW | | |
| Front-back adjusting | Yes | | |
| Up-down adjusting | Yes | Chain and turbine running with oil motor | |
| Temperature control zones | 8 | Temperature module from Mitsubishi | |
| Blowers | 4 | Power 120W | |
| Cooling | Yes | Put cooling water through entrance of screw | |
| Mold closing unit | Structure | | Without bar, bilateral synchronization center-mold closing, with large and average clamping force | Patent |
| Mold-moving guide | Ball bearing beeline guide | Small resistance, high speed, high precision, scuff resistance | |
| Platen dimension | 550×650 mm | Max. | |
| Platen distance | 350~780mm | | |
| Clamping force | 215KN | | |
| Fixing mold | Mold pressing platen | Make screw hole on platen, mold pressing platen | |
| Clamping stroke control | Inductive switch & moving | Discriminate end of mold opening, low-speed of mold opening, end of mold closing and low-speed of mold closing | |
| Electric protect | | Taiwan FOTEK electric protect switch with six-zone | |
| Die-head | Structure | Centre-feed | Average press, be able to oppugn | |
| Material | | 38CrMoALA inner mirror | |
| Accumulator | 1.9L | | |
| Die mouth | Φ80~Φ150 mm | Min~Max | |
| Parison thickness controlling | Available | MOOG 100-point | Selectable |
| Injecting stroke control | | Accumulator electric ruler & limit switch | |
| Parison adjustment method | Outer mandrel | | |
| Temperature zone | 4 | | |
| Standard bottom blowing unit | Blow pin stroke control | Inductive switch | Discriminate end of blowing pin up, end of blow pin down | |
| Blowing control mode | | Discriminate high pressure blowing and low pressure blowing | |
| Blowing pin cooling function | Cooling water | 1-in, 1-out cooling system | |
| Blowing pin position adjusted | | Front, back, left, right, three way displacement adjusting | |
| Electricity Controlling system | Temperature | Module | Hengke, alarm for up-limit and down-limit, P.I.D control | |
Load protect
| | Set electric protect according to
different zones, prevent from
destroy when abnormal electricity | |
| Programmer | Mitsubishi | The movement programmer composed in general language, and movement control may be revised according to the users' special demand | |
| Operating screen | Human interface screen | HITECH human interface screen with single color Made in Taiwan | |
| Timing setting | Touch screen | Set pressure and timing on the
screen to manage and control the
movement | |
| Hydraulic | Oil motor power | 60HP | | |
| Mail oil pump | | USA. DENISON | |
| Controlling | Proportional | Setting data from 0 to 999 | |
| Max. working pressure | 140 kg/cm2 | | |
| Pneumatics | Direction | | AIRTEC from Taiwan | |
| Pressure controlling | Separate style | Separate two adjusters for high and low pressure |
| Max. pressure | 8kg/cm2 | All air pipes are connected by PU pipe |
| Other information | Lubricities method | | Fill lubricate oil by hand on mold opening & closing basement | |
| Oil cooling | | Using heating exchanger from Taiwan | |
| Mold cooling | | Separated cooling water resource, use 5-in 5-out fix (single side) | |
| Gear box, hopper basement, die head cooling | | Use separated cooling water circuit, insure cooling effect | |
| Overall dimension | L*W*H | 6300*2200*3800(mm) | |
| Weight | | 12TON | |
| Total consumption | | | 98KW/Hr | |
| Total average consumption | | | 61.74KW/Hr | |
